Thông tin tổng quan về hãng Cidat

CIDAT (CENTRO INTERNAZIONALE per la DISTRIBUZIONE di ARTICOLI TECNICI) được thành lập tại Caronno Pertusella (Milan) vào năm 1975, để sản xuất và phân phối chính về ống thủy lực và ống cao su công nghiệp, cùng với việc sản xuất ống PVC áp suất thấp với số lượng nhỏ.

Năm 1978, CIDAT mở rộng thêm dòng sản phẩm tấm cao su và băng tải (bao gồm cả các phụ kiện liên quan thay thế).

Năm 2000, cùng với sự phát triển liên tục của nhiều thị trường đa dạng khác nhau thì phụ kiện ống thủy lực cũng bắt đầu trở thành một vấn đề quan trọng được các doanh nghiệp trong ngành thủy lực tập trung đầu tư.

Năm 2006, CIDAT bắt đầu thực hiện chiến lược mở rộng với việc xây dựng nhà máy HUEDIN (Romania) để sản xuất ống cao su áp suất cao và ống nhựa nhiệt dẻo.

Hiện nay, Cidat đã trở thành nhà cung cấp toàn cầu đáng tin cậy với việc đảm bảo sản phẩm chất lượng cao và công nghệ tiên tiến có thể đáp ứng mọi yêu cầu ứng dụng cho nhiều thị trường khác nhau.

Mặc dù vậy, tại Ý vẫn còn nhiều hãng chuyên sản xuất Ống thủy lực chất lượng cao, giá tốt hơn, nổi bật nhất là Vitillo. VHE đang là nhà phân phối chính thức các dòng Ống tuy ô thủy lực Vitillo chính hãng tại Việt Nam với cam kết giá rẻ, chất lượng đảm bảo, chính sách bảo hành và hậu mãi đầy đủ. (Quý khách tham khảo chi tiết sản phẩm tại đây)

Nhà máy sản xuất của Cidat

Nhà máy sản xuất của Cidat

Văn phòng chính, bộ phận kinh doanh và kho chứa (rộng 11.000m2) của Cidat được đặt tại Ý.

Kho xưởng của Cidat tại Ý

Kho xưởng của Cidat tại Ý

Từ năm 2006, các hoạt động sản xuất của CIDAT tập trung tại nhà máy THUNDERFLEX của Huedin, nằm ở Cluji, Romania. Là nơi để bộ phận R & D thiết kế, phát triển và công nghiệp hóa sản phẩm mới.

Đây cũng là trung tâm lắp ráp, có phòng thử nghiệm tiên tiến được trang bị đầy đủ, chuyên nghiệp để Cidat có thể quan sát và điều chỉnh toàn bộ quá trình sản xuất sao cho sản phẩm luôn đạt chất lượng tốt nhất.

Nhà máy sản xuất của Cidat được chứng nhận là có hệ thống chất lượng cao bởi TUV-Austria

Máy sản xuất và lắp ráp Ống thuỷ lực Cidat

Máy sản xuất và lắp ráp Ống thuỷ lực Cidat

Các dòng sản phẩm thủy lực được sản xuất bởi hãng CIDAT luôn đáp ứng tốt các yêu cầu khắt khe của khách hàng trên toàn cầu, quan trọng là có thể giải quyết tốt các vấn đề xảy ra đột ngột.

Từ các ứng dụng thông thường đến những ứng dụng có áp suất lớn hoặc nhiệt độ cao, các sản phẩm thiết bị như phụ kiện và ống thuỷ lực CIDAT luôn đảm bảo hiệu quả chất lượng, độ bền bỉ và tiết kiệm tối đa trong khi vận hành hệ thống thuỷ lực.

Chiến lược kinh doanh của Cidat là luôn hướng đến việc “Hỗ Trợ Khách Hàng” nhiều hơn, là hãng thuỷ lực đứng sau nhiều sự phát triển bền bỉ của các hệ thống thuỷ lực hiện đại ngày nay.

Ống thuỷ lực Cidat

Ống thuỷ lực Cidat

Ống mềm thuỷ lực Cidat

Ống mềm thuỷ lực Cidat

Phương châm kinh doanh của Cidat: “Khách hàng là nền tảng cho sự thành công của Cidat”. Công ty luôn nghiên cứu để xác định và đáp ứng tốt nhu cầu cấp thiết của khách hàng.

Đối với Cidat thì “Sự Hài Lòng của Khách Hàng” luôn là yếu tố hàng đầu để công ty nỗ lực liên tục để cải thiện chất lượng.

CIDAT cam kết với một chương trình quản lý môi trường liên quan đến việc cải thiện và bảo vệ môi trường bao gồm việc ngăn chặn chất thải ô nhiễm.

CIDAT cam kết giảm việc sử dụng năng lượng và sử dụng các sản phẩm, vật liệu theo cách tận dụng tốt nhất từ các nguồn tài nguyên thiên nhiên để giảm thiểu tối đa mọi tác động tiêu cực đến môi trường.

XEM THÊM CÁC CÂU HỎI KHÁC

Specializing in providing high-quality pipe clamps in Ho Chi Minh

Are you seeking a distributor that offers high-quality pipe clamps in Ho Chi Minh City?

Vina-Hydraulic Equipment Joint Stock Company is currently a genuine distributor in providing high-quality pipe clamps in the Ho Chi Minh area. The company currently offers a full range of Light Series Tube Clamp, Heavy Series Tube Clamp, Twin Series Pipe Clamp, Heavy aluminum tube clamp,

Xem tiếp ...

Enhances industry solution with high-quality stainless steel 304 elbows and tees

Are you looking for durable, safe, and efficient pipeline connection solutions for your hydraulic system or other industrial applications? Vina-Hydraulic Equipment Joint Stock Company is proud to announce the import of a new shipment of stainless steel weld elbows and weld tees. These additions enhance our diverse product portfolio, with many sizes, ready to meet your most demanding requirements.

 high-quality stainless steel 304 elbows and tees

Why

Xem tiếp ...

Firesleeve: High-Quality, Competitively Priced High-Temperature Sleeving

Vina-Hydraulic Equipment Joint Stock Company is currently a distributor of high-quality firesleeve with various sizes from 1.5 inches to 10 inches. Because our company imports large quantities, it has a competitive price for buyers.

Firesleeve: High-Quality, Competitively Priced High-Temperature Sleeving

Recently, VHE received an order to fabricate firesleeves for over 100 hydraulic hoses, destined for a factory in the North. Typically, VHE applies PJ insulation sleeves

Xem tiếp ...

Replacement and repair of old hydraulic hose service

Restoring Old Hydraulic Hose—Cost Savings, Increased Efficiency

Recently, Vina-Hydraulic Equipment Joint Stock Company (VHE) successfully received and processed about 20 old hydraulic hoses that were severely damaged, including burst, fractured, or cracked pipes.

Replacement and repair of old hydraulic hose service

The process of restoring old hydraulic hoses is meticulous and professionally carried out as follows:

- Receiving and Inspection: Firstly, old hydraulic hoses will be carefully checked

Xem tiếp ...

Genuine crimping fitting, ferrule, connector, union of Vitiilo at a good price in Long An

Vina-Hydraulic Equipment Joint Stock Company just imported over 40,000 sets of components, including hose fittings, ferrules, connectors, and unions, from the Vitillo brand. This shipment is intended for customers in Long An Province.

Genuine crimping fitting, ferrule, connector, union of Vitiilo at a good price in Long An

Some of the featured products include:

  • DIN hose fitting 3/8” - 12L, FE0618L12
  • Hydraulic DIN hose fitting 1/2” - 15L, M22x1.5, FE0822L15
  • Flange fitting 3K Interlock 1.1/2”
Xem tiếp ...

Professional large-size hydraulic hose crimping service in Binh Duong

Recently, VHE received an order for a large 6-inch hydraulic oil hose assembly, crimped with two flanges, for a trading company in Binh Duong. With a team of highly skilled technicians boasting ten years of experience in the hydraulic industry, VHE now offers custom hydraulic hose crimping services that meet the highest technical standards. The company crimps hoses according to

Xem tiếp ...

One-piece fitting (straight,90°,and 45°) made from high-quality SS316 stainless steel

Vina-Hydraulic Equipment Joint Stock Company just imported more than 1,000 sets of JIC one-piece fittings in SS316 stainless steel from. These include straight, 90-degree bent, and 45-degree angled fittings, offered at competitive prices to serve our valued customers. 

One-piece fitting (straight, 90°, and 45°) made from high-quality SS316 stainless steel

Popular Sizes Available:

  • Stainless Steel Hose Fitting, 3/8" - 9/16"x18 JIC, with 2-braid ferrule, SS316, 26711D-06-06RW.
  • Hose Fitting, 3/4" - 1.1/16"x12
Xem tiếp ...

Ferrules, JIC crimping fitting for 2-layer 1/2'' hydraulic hose

Ferrules, JIC crimping fitting for 2-layer 1/2'' hydraulic hose

Currently, VHE is distributing ferrules and JIC crimping fittings for 2-layer 1/2'' hydraulic hoses. Because the company imports goods from a large manufacturing factory in China, we guarantee high product quality that meets international standards.

In addition to a 1/2'' 2-layer JIC crimping fitting, VHE also distributes other types of crimping fittings such as:

  • DIN crimping fitting, 1/2" -
Xem tiếp ...

Genuine Parker Hydraulic Hoses & Fluid Transfer Solutions VHE

Vina-Hydraulic Equipment Joint Stock Company, an authorized distributor in Vietnam, offers a wide range of genuine Parker hydraulic hoses (301SN, 421SN, 471TC, BPK, JKPM, 731MSHA, R35TC, R42TC, 701MSHA).

Genuine Parker Hydraulic Hoses

Understanding Hydraulic Hoses: Function and Parker Construction

What are Hydraulic Hoses?

Hydraulic hoses, also known as hydraulic tubes or pipes, are reinforced conduits designed to transmit high-pressure hydraulic fluids within machinery. They

Xem tiếp ...

Detailed Analysis of M-M Hydraulic Fittings, JIC 3/4" - 1" BSPP

1. About technical specifications

- Fitting Type: Straight Connector (M-M)

- JIC End: 3/4" (37-degree JIC standard)

- BSPP End: 1" (British Standard Pipe Parallel)

- Material: Typically carbon steel, stainless steel, or brass

- Working Pressure: Varies by material and size, potentially reaching thousands of psi.

- Applications: Connects two hydraulic lines with differing sizes and thread standards.

M-M Hydraulic Fittings, JIC 3/4" - 1" BSPP

2.

Xem tiếp ...

HỖ TRỢ TƯ VẤN MIỄN PHÍ

Nếu không tìm được thông tin cần thiết, vui lòng liên hệ với chúng tôi để được tư vấn miễn phí

Hotline tư vấn

(028) 3503 0349

0903 967 588 - 0903 067 588

[email protected]

hoặc để lại thông tin thông qua công cụ
TƯ VẤN HỖ TRỢ ngay bên dưới, chúng tôi sẽ phản hồi ngay khi nhận được thông tin

Sản phẩm